If you own a Lexmark printer, you may have encountered the Lexmark Standard Bin Full error at some point. This error occurs when the printer tray is full of paper and cannot accept any more. You may see an error message like ‘Printhead Error 1204, Tray Door Open’ on your printer display screen when this happens. This can be frustrating, especially if you are in the middle of printing an important document.
Fortunately, there are some simple steps you can take to fix this error and resume your printing. In this blog, we will show you how to troubleshoot the Lexmark Standard Bin Full error and what to do if it persists. Let’s get started.
Step 1: Check the Paper Tray
The first thing you should do when you encounter the Lexmark Standard Bin Full error is to check the paper tray. Sometimes, the error may be caused by a simple mistake, such as loading too much paper into the tray or not removing the printed pages.
To check the paper tray, open it and see if there are any blank sheets of paper left. If there are, remove them and close the tray. If the tray looks empty but the printer still shows the error, it may be because of the tray sensor. The tray sensor is a device that detects how much paper is in the tray and sends a signal to the printer. Sometimes, the sensor may malfunction and indicate that the tray is full even when it is not.
Step 2: Position the Tray Correctly
If checking the paper tray does not solve the problem, you should make sure that the tray is positioned correctly. Sometimes, the tray may be loose or misaligned, which can cause the printer to think that it is full or open.
To position the tray correctly, slide it into the printer until it clicks into place. You should feel some resistance when you push it in. Once locked, the tray should be firm and flush with the printer housing. If the tray is wobbly or protruding, try adjusting it until it fits snugly.
Step 3: Load Paper Properly
Another possible cause of the Lexmark Standard Bin Full error is improper paper loading. If you load paper incorrectly into the tray, it may jam or damage the printer mechanism. This can prevent the printer from feeding paper properly and result in errors.
To load paper properly, follow these steps:
- Make sure that you are using paper that is compatible with your printer model and size.
- Check that the paper is not wrinkled, torn, or damp.
- Align the paper stack neatly and tap it on a flat surface to remove any air pockets.
- Place the paper in the tray with the side that should be facing up (usually labeled on the tray) facing up.
- Push the paper in as far as possible without forcing it.
- Adjust the paper guides to fit the paper size.
Step 4: Clean the Printer
If none of the above steps work, you may need to clean your printer. Over time, dust and debris can accumulate inside your printer and interfere with its performance. This can cause errors such as Lexmark Standard Bin Full or Printhead Error.
To clean your printer, follow these steps:
- Turn off your printer and unplug it from the power source.
- Open your printer and remove any ink cartridges or toner cartridges.
- Use a soft and dry cloth to wipe away any dust or dirt from the paper tray and other accessible parts of your printer.
- Use a can of compressed air or a vacuum cleaner with a crevice attachment to blow away any dust or debris from inside your printer. Be careful not to touch any sensitive parts or wires.
- Use a cotton swab dipped in alcohol to clean any rollers or sensors that may be dirty or sticky.
- Reinstall any ink cartridges or toner cartridges and close your printer.
Step 5: Clear Paper Jams
Sometimes, paper jams can cause errors such as Lexmark Standard Bin Full or Printhead Error. Paper jams occur when paper gets stuck inside your printer and prevents it from feeding properly. To clear a paper jam, follow these steps:
- Turn off your printer and unplug it from the power source.
- Open your printer and locate where the jammed paper is.
- Gently pull out the jammed paper without tearing it. If you cannot reach it, try using tweezers or another tool to grab it.
- Check for any remaining pieces of paper or foreign objects that may be blocking your printer.
- Close your printer and plug it back in.
Conclusion
You can easily fix the common Lexmark Standard Bin Full error by following some basic troubleshooting steps. By checking your paper tray, positioning it correctly, loading paper properly, cleaning your printer, and clearing paper jams, you can resolve this error and enjoy your printing. If these steps do not work, you may need to contact Lexmark’s customer support team for further assistance. We hope this blog has been helpful and informative. Happy printing!